ADU · Putnam County
Can you build an ADU in Brewster, NY?
Village of Brewster has 10 districts. 9 districts prohibit ADUs, 1 requires a special-use permit. Check your address to confirm the district that applies to your parcel:
What the Brewster code says
An accessory single-family dwelling is allowed only in the R district, by special exception permit from the Board of Trustees. The owner has to live on the property.
Conditions the code attaches:
- The R20 district is residential but does not allow the accessory unit; its only special exception use is a bed-and-breakfast.
- Every other district allows only the uses it lists, and an accessory dwelling is not among them.
- Confirm with the Village Building Department at (845) 279-3760.
What the Brewster code indicates by district
The table below shows how each district treats ADUs, alongside the lot and setback standards that govern a second unit. District boundaries and conditions vary, so treat this as a starting point and confirm the district that applies to your parcel.
| District | Min lot | Setbacks F / S / R | Max height | ADU |
|---|---|---|---|---|
| Single-Family Residential | 0.17 ac | 20 / 12 / 35 ft | 35 ft | Special permit |
| Residential | 0.46 ac | 25 / 20 / 40 ft | 35 ft | No |
| Professional and Business Office | 0.17 ac | 20 / 15 / 15 ft | 35 ft | No |
| Business 1 | 0.08 ac | 0 / 0 / 0 ft | 60 ft | No |
| Business 2 | 0.23 ac | 10 / 10 / 30 ft | 35 ft | No |
| Business 3 | 0.11 ac | 10 / 10 / 15 ft | 35 ft | No |
| Mixed-Use | 0.11 ac | 20 / 25 / 15 ft | 35 ft | No |
| Office Park | 0.92 ac | 25 / 20 / 10 ft | 45 ft | No |
| Light Manufacturing and Wholesale | 0.57 ac | 40 / 15 / 50 ft | 35 ft | No |
| Conservation | 1.38 ac | 25 / 15 / 35 ft | 35 ft | No |
Single-Family Residential - Density is limited to one dwelling unit per lot plus one accessory dwelling. The 0.5 floor area ratio binds alongside the 25% building coverage, so a two-storey house reaches the floor area limit before it uses up the footprint allowance.
- On the 7,500 sq ft minimum lot, the floor area ratio allows 3,750 sq ft of floor area across all storeys.
- Within the village, an accessory single-family dwelling is reachable only in the R district.
- No open space per dwelling unit is required in this district.
Residential - The floor area ratio, not the coverage cap, sizes a house here. On a 20,000 sq ft lot it allows 2,000 sq ft of floor area across all storeys, while the 15% coverage allowance would permit a 3,000 sq ft footprint.
- A minimum of 5,000 sq ft of open space is required for each dwelling unit.
- On a corner lot, a 25 ft side yard applies on the street side.
Professional and Business Office - Development is capped at one dwelling unit per lot or one business per lot, so the figures shown do not translate into multiple units on a single parcel.
- On a corner lot, the side yard on the street side must be 20 ft.
- At least 100 sq ft of open space is required for each dwelling unit.
Business 1 - The zero yards apply only away from residential neighbors: any use abutting a residential use must keep a minimum yard of 10 ft. The figures shown are base standards, and incentives may allow added storeys, height, residential density, floor area ratio and reduced yards.
- Density is stated as 80 bedrooms per acre rather than as dwelling units, so the unit count depends on the bedroom mix.
- Incentives above the base storeys, height, residential density, floor area ratio and yards may be granted under §§ 263-9E, 263-9G, 263-9H and 263-9K.
- Residential use is limited to upper floors unless it is part of a larger transit-oriented development project, and is not allowed along Main Street or Railroad Avenue.
- Drive-through windows are prohibited outright.
- The schedule requires no open space per dwelling unit in this district.
Business 2 - Gasoline stations, automobile dealerships and automotive repair uses must each stand at least 1,000 ft from another use of the same kind, which can rule a site out entirely. A 10 ft landscaping buffer is also required along the site frontage.
- The 10 ft landscaping buffer along the frontage applies in addition to the setbacks shown.
- The 1,000 ft separation between like automotive uses is a distance between sites, not a setback from the lot line.
Business 3 - Townhouse density here is set at 64 bedrooms per acre, so a townhouse scheme is sized on bedrooms rather than units. A single-family home is limited to one dwelling unit per lot.
- Added storey and height incentives above the figures shown are available under § 263-11D.
- The schedule requires no open space per dwelling unit in this district.
Mixed-Use - The figures shown apply to residential use. With public water and public sewer, a nonresidential or mixed use in MU must sit on at least 8.9 acres, with front, side and rear yards of 30 ft.
- Where a use abuts a residential use, the minimum yard is 35 ft.
- A minimum open space of 400 sq ft is required per dwelling unit.
- Under the nonresidential standards, the lot frontage, building coverage, height and floor area ratio are the same as those shown.
- Allowed uses include single-family and multiple-family dwellings, townhomes, artist lofts and studios, offices, and business incubator and co-working spaces.
Office Park - Height can rise to a maximum of 70 ft where self-contained parking is provided within the structure, above the base height shown. Each dwelling unit also requires 5,000 sq ft of minimum open space.
- The taller building is available only where the parking is self-contained within the structure.
- Building coverage is capped at 37.5%.
- A minimum open space of 5,000 sq ft is required per dwelling unit, which limits how many units a lot can hold.
Light Manufacturing and Wholesale - This district is for light manufacturing, warehousing and wholesale, along with retail, general business and indoor recreation. A research facility is allowed only by special exception.
- A research facility requires a special exception rather than being available by right.
Conservation - Permitted uses are conservation and recreation areas. On the 60,000 sq ft minimum lot the 0.05 floor area ratio allows 3,000 sq ft of floor area in total, the same as the 5% building coverage allowance, so a second storey is effectively unavailable.
- Uses are limited to conservation and recreation areas, so this district will not support a conventional house or commercial building program.
- Height and storey limits are academic here: the total floor area allowance matches the permitted footprint, leaving nothing for a second floor.
ADUs vs. short-term rentals in Brewster
Short-term-rental status not confirmed for Village of Brewster. Whether a home in the Village of Brewster can be rented short term is not confirmed. Treat it as an open question rather than a yes, and confirm with the Building Department before counting on short-term rental income. These are separate questions from whether you can build an ADU — a unit you're allowed to add isn't automatically one you're allowed to rent nightly, so check both.
Good to know
- Residential lot minimum0.17–0.46 ac — an ADU still has to fit the district's lot and setback envelope.
- UtilityNYSEG territory.
- Zoning codeecode360.com/12695635
- Building dept(845) 279-3760
ADU FAQ — Brewster, NY
Are ADUs allowed in Brewster, NY?
Village of Brewster has 10 districts. 9 districts prohibit ADUs, 1 requires a special-use permit. Check your address with the free ADU checker, or confirm with the building department at (845) 279-3760.
Do I need a special permit for an ADU in Brewster?
It depends on the district: 1 of 10 require a special-use permit, the rest do not. Check the district that applies to your parcel before you design.
Can I use an ADU as a short-term rental in Brewster?
Short-term-rental status not confirmed for Village of Brewster. ADU occupancy and short-term-rental rules are separate: an ADU you can build isn't automatically one you can rent nightly. Confirm both before you count on STR income.
What an ADU costs to build in Brewster
Permission is one question and budget is another. An 800 sq ft accessory unit here runs roughly $215k–285k at a standard finish, and the per-square-foot rate comes in above a full house because the kitchen, bath, panel and heating plant cost the same either way. See the full cost to build an ADU in Brewster, priced by size.
How we know this
- Zoning code
- ecode360.com/12695635
- Districts confirmed
- 10 of 10 — every mapped district.
- Last reviewed
- Not covered here
- Overlay districts, the zoning map, and any conditions attached to an individual parcel. Size limits and owner-occupancy terms sit in the code section above, not in this summary.
More on Brewster: Full zoning for new construction · ADU build cost · House build cost · ADU rules across Putnam County · All Putnam County towns
ADU information for Village of Brewster is compiled from the municipal code (last reviewed 2026-07-24) and provided for decision-support only — not legal or architectural advice. ADU eligibility, size, owner-occupancy and permit conditions vary by district and often carry exceptions; verify with the building department at (845) 279-3760 before relying on any answer. Source: the Offsite / Aldo zoning dataset.